Drilling rig for water wells, mineral exploration, geothermal applications, coring, seismic. It can drill up to 1100 m and it is possible to mount a mud pump or a high capacity compressor depending on the various needs. The rig can be mounted on truck or on semi-trailer (in this case it is possible to handle 9 m drill pipes). Its robust construction does not prejudice its versatility. The rig can be used with all the main drilling methods: direct and reverse circulation by mud and by down the hole hammer. It can be operated remotely.
| Work Methods | Rotation With Direct Circulation Nucleus Destruction With Bleeding By Water, Mud And Foam Rotation With Down The Hole Hammer Reverse Circulation Coring |
| Power Pack | Engine Power From 394 Hp (294 KW) To 831 Hp (620 KW) |
| Fuel Tank | Capacity Da 300 Litri (79 Gal) To 600 Litri (158 Gal) |
| Sliding Mask | Stroke 2250 Mm (7 Ft 5”) |
| Mast | Maximum Stroke Of Rotary Head 10,6 M (34 Ft 9”) Maximum Pull Up 50000 DaN (112400 Lbf) – Pull Down 23300 DaN (52380 Lbf) |
| Rotary Head | Model TM50: Maximum Torque 23500 Nm (17333 Lbf•Ft) – Maximum Speed 150 Rpm Modello TM20CR12: Maximum Torque 10200 Nm (7523 Lbf•Ft) – Maximum Speed 1200 Rpm |
| Winch | Standard: Maximum Line Pull 8000 DaN (17986 Lbf) Optional: Maximum Line Pull 10000 DaN (22045 Lbf) Wire-Line: Maximum Line Pull 1300 DaN (2922 Lbf) – 1360 M (4462 Ft) Di Fune – 95 M/Min (305 Ft/Min) |
| Double Hydraulic Clamp | Model MS520: Maximum Passage 520 Mm (20”) |
Download our presentation brochure to learn more about the equipment
MI 55 E