Drilling machine for water and mining, seismic, coring and geothermal research to increase depth, it can in fact reach 1500 m and it is possible to access both the plant and the high capacity compressor. The installation can be on a truck or semi-trailer and in the case of maneuvering also 9 m rods. The pride of our production in terms of capacity remains in any case a very flexible machine, allows in fact to work with various drilling systems: turn and turn a mud, direct drilling and back to hammer bottom hole. The drilling machine is also equipped with electric controls that can be activated in case of need even at a distance.
| Work Methods | Rotation With Direct Circulation Nucleus Destruction With Bleeding By Water, Mud And Foam Rotation With Down The Hole Hammer Reverse Circulation Coring |
| Power Pack | Engine Power From 394 Hp (294 KW) To 831 Hp (620 KW)Fuel TankCapacity From 300 Litri (79 Gal) To 600 Litri (158 Gal)Sliding Mast (Optional)Stroke 2250 Mm (7 Ft 5”) |
| Mast | Maximum Stroke Of Rotary Head 10,6 M (34 Ft 9”) Maximum Pull Up 54000 DaN (121400 Lbf) – Pull Down 26000 DaN (58450 Lbf) |
| Rotary Head | Model TM60: Maximum Torque 34335 Nm (25324 Lbf•Ft) – Maximum Speed 145 Rpm Model TM20CR12: Maximum Torque 10200 Nm (7523 Lbf•Ft) – Maximum Speed 1200 Rpm |
| Winch | Standard: Maximum Line Pull 10000 DaN (22045 Lbf) Optional: Maximum Line Pull 15000 DaN (33068 Lbf) Wire-Line: Maximum Line Pull 1300 DaN (2922 Lbf) – 1360 M (4462 Ft) Of Rope – 93 M/Min (305 Ft/Min) |
| Double Hydraulic Clamp | Model MS520: Maximum Passage 520 Mm (20”) Model MS620: Maximum Passage 620 Mm (24”) |
Download our presentation brochure to learn more about the equipment
ZEGA D535T